- #FLIR AUTO PORT FORWARDING WIZARD FOR FREE#
- #FLIR AUTO PORT FORWARDING WIZARD MAC OSX#
- #FLIR AUTO PORT FORWARDING WIZARD MAC#
Now that we know what the setup should be, we need to configure our router so that it works according to the description above. The public IP address is the same for all three FLIR AX8 cameras, so when a user wants to gain access to a specific FLIR AX8 camera from the Internet, they have to specifiy not only the IP address but also the port number in the URL.įor more information about ports and IP addresses, see the Wikipedia entry on computer ports, available here. The local ports are set to 80 because this is the port that the HTTP protocol uses. Note that the public ports are arbitrarily choosen and can be any desired port number. In our setup, each FLIR AX8 would be a different apartment. We want a public IP address that routes the user to the FLIR AX8 cameras, and because we have three different FLIR AX8 cameras, we need to forward three public ports to each of the three camera IP addresses.Īn intuitive way of understanding IP addresses and ports is to consider the IP address as the street address of an apartment complex and the port number as the apartment number. Now we want to set up port forwarding in the router.
#FLIR AUTO PORT FORWARDING WIZARD FOR FREE#
The configuration settings that are described below are essentially identical for all router brands but there may be small differences, mainly in the user interface. Download lorex auto port forwarding wizard for free Set up wizard was super easy, wireless signal for the camera's is strong and night vision is great It is currently Sun 12:47 pm Wireless Web cameras used to be quite hard to get working correctly, but lately they’ve become much easier to set up and use Honeywell Video Systems. Also, be sure to set the default gateway to the router's address of 192.168.254.1. For each camera, we can give it an IP address within the same subnet as teh computer and router. Click the gear icon to change the camera's IP address.
#FLIR AUTO PORT FORWARDING WIZARD MAC#
You should see the camera listed, along with its IP address and MAC address. Download FLIR IP Config and run the application. To setup the cameras, you can connect them to the router's local ports. You can set this address by accessing the local port of the router.
The router should have a local ethernet port configured to 192.168.254.1. The router should have a local ethernet port configured to 192.168.254.1. Set an IP address on the computer that will be used to configure the cameras. We will not change this address.įirst, plug the computer and camera cables into the local ports on the router. Every device that is connected to the router and performs a task on the Internet will be identified as having the IP address 81.70.110.243. The 81.70.110.243 address is public and visible from outside the local network. The subnet contains the local addresses which are not seen from outside this local network. * Dimensions (WxDxH): 14.96" x 13.39" x 1.Consider the setup shown in the image below. * Backup Media: USB Flash Drive, USB External HDD, E-SATA * Playback Channel: 1/4/8/12/16 Adjustable * PTZ control: RS-485 Pelco D & P Protocol * Video Outputs 1 x HDMI, 1 x VGA, 1 x BNC * System Navigation: USB Mouse, IR Remote Controller * Pentaplex: Simultaneous View, Record, Playback, Backup & Remote Specifications* Operating System: Embedded LINUX * Supports RS485 (PTZ), Audio I/O, Alarm I/O * Auto Port Forwarding wizard for easy remote connection * Supports 2x HDD (SATA, 2TB) up to 4TB capacity Key Features* 34% greater resolution than standard D1 Pentaplex Operation, FLIR DDNS Service Included Recorder with 1TB Hard Drive, Embedded LINUX Operating System, your public IP address is static ( is not changing from time to time) and you configure port forwarding in your router for inbound TCP port 554 from WAN.
#FLIR AUTO PORT FORWARDING WIZARD MAC OSX#
0 kommentar(er)
